Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls Manual de instrucciones - Página 29
Navegue en línea o descargue pdf Manual de instrucciones para Proyector Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls. Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls 33 páginas. Micro portable wireless xga lcd projector
También para Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls: Especificaciones (4 páginas)
Imprimir página
Before calling for service
Before calling for service, check the following points.
Problem
Power does not
B The power cord may not be connected.
turn on.
B The main power supply is not being supplied to the
wall outlet.
B TEMP indicator is illuminated or flashing.
B LAMP indicator is illuminated or flashing.
B The lamp unit cover has not been securely
installed.
No picture
B The video signal input source may not be
appears.
connected properly.
B The input selection setting may not be correct.
B The "BRIGHT" adjustment setting may be at the
minimum possible setting.
B The "SHUTTER" function may be in use.
The picture is
B The lens cover may still be attached to the lens.
fuzzy.
B The lens focus may not have been set correctly.
B The projector may not be at the correct distance
from the screen.
B The lens may be dirty.
B The projector may be tilted too much.
The color is pale
B "COLOR" or "TINT" adjustment may be incorrect.
or grayish.
B The input source which is connected to the
projector may not be adjusted correctly.
No sound can
B The audio signal source may not be connected
be heard.
properly.
B The volume adjustment may be at the lowest
possible setting.
The remote
B The battery may be weak.
control unit
B The battery may not be inserted correctly.
does not
B The remote control signal receptor on the projector
operate.
may be obstructed.
B The remote control unit may be out of the
operation range.
The buttons on
B The "CONTROL KEY" may be set to "OFF".
the projector do
In order to set the "CONTROL KEY" to "ON"
not function.
without using the remote control unit, keep holding
down the ENTER button on the projector and press
the MENU button for more than 2 seconds.
56-E
NGLISH
Possible cause
Page
Problem
–
The picture does
–
not display
correctly.
50
51
–
Picture from
computer does
–
not appear.
25
38
29
–
25
20
–
20
38
Cleaning and maintenance
–
Before carrying out cleaning and maintenance, be
–
sure to disconnect the power cord plug from the
wall outlet.
30,
33
Wipe the cabinet with a soft, dry cloth.
–
If the cabinet is particularly dirty, soak the cloth in water with a small amount
23
of neutral detergent in it, squeeze the cloth very well, and then wipe the
23
cabinet. After cleaning, wipe the cabinet dry with a dry cloth. If using a
chemically-treated cloth, read the instructions supplied with the cloth before
23
use.
Do not wipe the lens with a cloth that is dusty or which produces lint.
If any dust or lint gets onto the lens, such dust or lint will be magnified and
46
projected onto the screen. Use a blower to clean any dust and lint from the
lens surface, or use a soft cloth to wipe off any dust or lint.
Possible cause
B The signal format ("TV-SYSTEM") may not be set
correctly.
B There may be a problem with the video tape or
other signal source.
B A signal which is not compatible with the projector
may be being input.
B The cable may be too long.
B The external video output for the laptop computer
may not be set correctly.
(You may be able to change the external output
settings by pressing the [Fn]+[F3] or [Fn]+[F10]
keys simultaneously. The actual method varies
depending on the type of computer, so refer to the
documentation provided with your computer for
further details.)
B If an RGB INPUT indicator is turned off, the video
signals may not be output from the computer.
Page
39
–
60
–
–
16
E
-57
NGLISH