DiamondBoxx XL2 Manual - Página 8

Navegue en línea o descargue pdf Manual para Altavoces portátiles DiamondBoxx XL2. DiamondBoxx XL2 12 páginas. Portable bluetooth speaker / amplifier system
También para DiamondBoxx XL2: Manual del usuario (16 páginas)

Imprimir página

Rear Panel

This is where you plug in the included charger to recharge your

DiamondBoxx. USE ONLY THE INCLUDED CHARGER OR MAJOR

DAMAGE CAN OCCUR, THE MODEL XL and XL2 USE A 7A 4 PIN

CHARGER THAT IS DIFFERENT THAN MODEL M AND MODEL L

CHARGERS.

The OUT jack is for connecting to the IN jack of another

DiamondBoxx Model XL2, XL, L2, or L. They can be daisy-chained

in this manner an indefinite number of times to create a giant

sound system! If two Model XLs are to be used in a LEFT and

RIGHT stereo setup, use the TWS wireless function. If the ¼" jack

method is used both DiamondBoxx will play stereo information

themselves.

You can combine the TWS function with the ¼" jack linking

method as well if you have multiple "left" DiamondBoxx and

multiple "right" DiamondBoxx. If this is something you wish to do

make the Left and Right pair of DiamondBoxx using the TWS

function as outlined on page 4, then connect additional "left"

DiamondBoxx together using the rear ¼" jacks and ¼" stereo

cable (sometimes called TRS or balanced cable, available on

DiamondBoxx.com or a musical instrument store) Repeat the

wired linking for the "right" speakers. No wire is needed between

the left and right sides.

Getting crazy with it

If you really want to get crazy we suggest purchasing some

DiamondBoxx replacement small feet from DiamondBoxx.com to

screw into the sides of the DiamondBoxx so that they can be

positioned vertically instead of horizontally. (These are the feet

for the Model M and L, L2) Then stack the left and right

DiamondBoxxes in towers with the tweeters to the outsides and

place all DiamondBoxxes in SP Mode. This will create a "Line-Ar-

ray" system which will give you the loudest possible output,

especially at a distance.