Panasonic RQTV0097-2P Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Panasonic RQTV0097-2P. Panasonic RQTV0097-2P 24 páginas. Cd stereo system

Panasonic RQTV0097-2P Manual de instrucciones

Radio

Manual tuning
Manual tuning
1
Press [TUNER/BAND] to select "FM" or "AM".
2
Press [PLAY MODE] to select "MANUAL".
3
Press [4/REW/4] or [3/FF/¢] to select the
frequency of the required station.
" ST " is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press [4/REW/4] or [3/FF/¢] for a moment until the
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may not function when there is excessive
interference.
• To cancel auto tuning, press [4/REW/4], [3/FF/¢] or
[STOP 7].
To improve FM sound quality
To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO"
disappears.
• MONO is also canceled if the frequency is changed.
• Turn off "MONO" for normal listening.
10
Memory preset
Memory preset
Up to 15 stations can be set in both the FM and AM bands.
Numeric
Preparation
buttons
Press [TUNER/BAND] to select "FM" or "AM".
Automatic presetting
Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting
Manual presetting
1
Press [PLAY MODE] to select "MANUAL".
2
Press [4/REW/4] or [3/FF/¢] to tune to the
required station.
Press [PROGRAM].
3
4
Press numeric buttons to select a channel.
The station occupying a channel is erased if another
station is preset in that channel.
5
Repeat steps 2 to 4 to preset more stations.
Selecting a preset station
Selecting a preset station
Press numeric buttons to select the channel.
For channels 10 to 15 press [h10], then the two digits.
OR
1
Press [PLAY MODE] to select "PRESET".
2
Press [4/REW/4] or [3/FF/¢] to select the
channel.
FM allocation setting
FM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in
0.1 MHz steps.
To change the step to 0.1 MHz
1
Press and hold [TUNER/BAND].
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
2
Continue to hold down [TUNER/BAND].
• When the minimum frequency changes, release the
• After the setting is changed, any previously preset
button. To return to the original step, repeat the above
steps.
frequency will be cleared.