Panasonic RX-C52 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Panasonic RX-C52. Panasonic RX-C52 21 páginas. Portable stereo component system

Imprimir página

POWER

SOURCE

m@ Battery Operation

1) Open the Battery Compartment cover as shown in the

figure.

2) Insert

8 "'D" size

(Panasonic

UM-1

or equivalent)

batteries into the battery compartment, making sure that

the

proper

polarities

are

maintained,

and

that the

batteries are installed in the specified numerical order.

3) Replace the compartment cover.

eBattery removal (lower side)

Remove the batteries as shown in the figure.

eBattery life

When the batteries are weak, the tape speed will slow down,

the sound

will become

distorted,

and

the volume

will

decrease.

ePress the Power Switch to "m= ON".

ePress the TAPE

Button (FUNCTION).

Press

the Forward Button or Reverse

Button.

elf the Power/Battery Check Indicator goes out or dims,

replace all batteries with new ones.

POWER/BATT

\ Cy.

I N

POWER/BATT

Note:

If the unit does not enter the playback mode even

when the Forward or Reverse Button is pressed, the

batteries are no good, replace all batteries with new

ones.

@ AC Power Operation

eBe sure to select AC voltage before applying power.

1) First, check the AC Voltage Selector to insure that it is

set to the voltage which corresponds to your household

AC voltage. If not, select the proper voltage by inserting

a small screwdriver into the slot provided and turning the

screwdriver until the desired voltage appears through the

opening.

200

220

200-220 V | 230-250 V

110-115

2) Connect the accessory AC power cord to the AC Socket

in the unit and your household AC power outlet. Upon

plugging the power cord into the AC Socket, the unit will

automatically switch from battery to AC operation.

115-127 V

AC power outlet

AC power cord

If using AC voltage other than 110-127 V, it may be

necessary to use an adaptor plug.

Car Battery Operation

insert the plug of the car adaptor cord into the DC Input

Jack.

Plug the opposite end of the cord into the cigarette lighter

socket in your car.

Upon plugging the car adaptor cord into the DC Input

Jack, the unit will automatically

switch from internal

battery to car battery operation.

@oc

IN 13.2 V

£(C24)

Cigarette

lighter

Use only Panasonic

car adaptor, RP-952

Note:

For the connection of an adaptor cord, follow the

instructions provided with the cord.