Panasonic RXDS5 - RADIO CASSETTE W/CD Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Panasonic RXDS5 - RADIO CASSETTE W/CD. Panasonic RXDS5 - RADIO CASSETTE W/CD 8 páginas. Portable stereo cd system
También para Panasonic RXDS5 - RADIO CASSETTE W/CD: Manual de instrucciones (9 páginas), Manual de instrucciones (9 páginas), Manual de instrucciones (8 páginas)
Imprimir página
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORM-
ANCE OF PROCEDURES
OTHER THAN THOSE SPECI-
FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO
NOT
OPEN
COVERS
AND
DO
NOT
REPAIR
YOURSELF.
REFER
SERVICING
TO
QUALIFIED
PERSONNEL.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
WARNING:
TO REDUCE THE RiSK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT EX-
POSE THIS APPLIANCE TO RAIN, SPLASH-
ING, DRIPPING OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Precautions
Before using this unit please read these operating instructions carefully.
Take special care to follow the warnings indicated on the unit itself as
well as the safety suggestions listed below.
Afterwards keep them handy for future reference.
Safety
—_
. Power Source—The unit should be connected to power supply only
of the type described in the operating instructions or as marked on
the unit.
Polarization—If the unit is equipped with a polarized AC power plug
(a plug having one blade wider than the other), that plug will fit into the
AC outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
Power Cord Protection—AC power supply cords should be routed
so that they are not likely to be walked on or pinched by items placed
upon or against them. Never take hold of the plug or cord if your hand
is wet, and always grasp the plug body when connecting or discon-
necting it.
Nonuse Periods—When the unit is not used, turn the power off.
When left unused for a long period of time, the unit should be un-
plugged from the household AC outlet.
w
g
Ea
Installation
1. Water and Moisture—Do not use this unit near water—for example,
near a bathtub, washbowl, swimming pool, or the like. Damp base-
ments should also be avoided.
2. Condensation—Moisture may form on the iens in the following con-
ditions...
immediately after a heater has been turned on.
èin a steamy or very humid room.
ewhen the unit is suddenly moved from a cold environment to a warm
one.
If moisture forms inside this unit, it may not operate properly. To cor-
rect this problem, turn on the power and wait about one hour for the
moisture to evaporate.
3. Heat—The unit should be situated away from heat sources such as
radiators and the like. It also should not be placed in temperatures
less than 5°C (41°F) or greater than 35°C (95°F).
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of suffi-
cient magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance
(servicing)
instructions in the literature accompanying the ap-
pliance.
Placement
1. Ventilation—The unit should be situated so that its location or posi-
tion
does
not
interfere
with
its
proper
ventilation.
Allow
10 cm (4") clearance from the rear of the unit.
Foreign Material—Care should be taken so that objects do not fall
into and liquids are not spilled into the unit. Do not subject this unit to
excessive smoke, dust, mechanical vibration, or shock.
. Magnetism—The unit should be situated away from equipment or
devices that generate strong magnetic fields.
Stacking—Do
not place heavy objects, other than system
com-
ponents, on top of the unit.
l
'
Surface—Place the unit on a flat, level surface.
. Carts and Stands—The unit should be used only
with a cart or stand that is recommended by the
manufacturer. The unit and cart combination should
be moved with care, Quick stops, excessive force,
and uneven surfaces may cause the unit and cart
combination to overturn.
7. Wall or Ceiling Mounting—The unit should not be mounted to a
wall or ceiling, unless specified in this operating instructions.
N
> Q
py