Panasonic SCPM313 - CD MICRO SYSTEM Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Panasonic SCPM313 - CD MICRO SYSTEM. Panasonic SCPM313 - CD MICRO SYSTEM 16 páginas. Micro system with built-in 5 cd changer
Imprimir página
Cassette tapes – Play and record
Basic play
Basic play
Press [OPEN 0] on top of the unit.
1
2
Insert a cassette.
Forward side
Close the lid by hand.
3
3]
Press
TAPE
4
[
To play the other side of the cassette, turn the cassette
over.
To
stop tape playback
start one touch play
fast-forward and
rewind
TPS (Tape Program Sensor)
TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
Press [4/REW/ 4] or [3/FF/¢] during play.
Play resumes from the track found.
TPS may not function properly with:
• Short silent parts
• Noise occurs between tunes
• Silent parts found within tunes
Before recording
Before recording
Preparation:
Wind up the leader tape so that recording can begin
immediately.
• Use normal position tapes.
• High position and metal position tapes can be used, but this unit
will not be able to record or erase them correctly.
Recording the radio
Recording the radio
Insert the cassette to be recorded on.
1
2
Tune to the required station (refer page 11).
3
Press [¶/8 REC] to start recording.
10
RQT7923
Insert inside the
guides
to start play.
Action
Press [CLEAR 7].
Press [TAPE 3] when the system is OFF
with the cassette loaded.
Press [4/REW/4 ] or [3/FF/¢] in the
stop mode.
Recording CDs
Recording CDs
1
Insert the cassette to be recorded on.
Forward side
Press [CD 6] and then [STOP 7, –DEMO].
2
Press [0 OPEN/CLOSE] to insert the CD.
3
Press again to close.
4
Press [PLAY MODE] to select your desired mode
(refer page 7).
5
Press [¶/8 REC] to start recording.
Recording programmed tracks
Recording programmed tracks
1
Program the tracks you want (refer page 8).
2
Press [¶/8 REC] to start recording.
Other basic operations
Other basic operations
To
Action
erase a recorded
1) Insert the cassette to be recorded on.
2) Press [TAPE 3] and then [CLEAR 7].
sound
3) Press [¶/8 REC].
Press [CLEAR 7].
stop recording
stop recording
1) Press [¶/8 REC].
temporarily
2) Press again to resume recording.
to record on the
Turn the cassette over and press
other side of the
[¶/8 REC].
tape
Erasure prevention
Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side B
Tab for side A
Top of the unit
Cassette lid
Insert inside the
guides
To re-record
Normal tape
Adhesive tape