Biomorph Flexo Corner Montaje - Página 14

Navegue en línea o descargue pdf Montaje para Mobiliario interior Biomorph Flexo Corner. Biomorph Flexo Corner 18 páginas.

Cable Diagram

IMPORTANT:

All cables must be tacked up and made neat with supplied cable guides. NO cables may hang down ex-

cept those passing through cable chains. Make sure cables have enough slack between surfaces to allow

full height adjustment between surfaces.

IMPORTANT:

Extend desktops to full opposite heights to ensure that cables will travel w/o stress).

POWER CABLE

Connect power cables to power

strips inside cable cabs.

CABLE CAB

(Optional) Place door towards user.

LONG CABLES

Use LONG cables to connect both

legs to ports #1 & #2 in controller box.

CABLE TRACKS

Red FRONT surface

Blue REAR surface

2 PORT CONTROLLER

box for FRONT surface

LONG CABLE/

FRONT LEG

POWER CABLE

SWITCH

for FRONT surface use long 45˚ angle bracket.

Control switches connect to port A1.

SWITCH

LONG CABLE/

FRONT LEG

GROMMET HOLE

Place grommet into

grommet hole. Route

cable accordingly.

WIRE CLIP

A wire clip MUST be placed directly

behind switch to prevent cable droop