Easypix aquapix W1400 Manual - Página 2

Navegue en línea o descargue pdf Manual para Cámara digital Easypix aquapix W1400. Easypix aquapix W1400 3 páginas.

Imprimir página
Easypix aquapix W1400 Manual
Normal/ B&W/ Sepia/ Negative/
Effect
Lomo/
Pencil
Sketch/
Green/ Blue/ Vivid
Date Stamp
On/ Off
Quick View
On/ Off
VGA 640 x 480
Movie Size
QVGA 320 x 240
Auto
Daylight
Cloudy
White Balance
Tungsten
Fluorescent
Sounds
Off/On
Frequency
50Hz / 60Hz
Power Save
Off / 1Minute / 3 Minutes
English/ French/
Language
Deutsch/Italian/Spanish/
Portuguese/Japanese
Date/Time
YY/MM/DD/HH/MM/SS
Format
Yes/No
Reset All
Yes/No
Version
Shows the firmware version
Note: Turning off the camera will not erase the last settings.
5. Using the camera
5.1 Installing the batteries
1. Open the battery door.
2. Insert 2 x AAA alkaline batteries into the camera compartment.
3. Close the battery door.
Note:
Make sure that the batteries are inserted in the right directions (as marked in the diagram above).
5.2 Inserting a memory card (not included)
This camera has no built-in internal memory. The memory can be gained with a MicroSD memory
card (not included).
Follow the instructions below to insert the optional MicroSD memory card into the camera.
1. Turn off the camera first.
2. Open the battery door (please make sure the battery door was unlocked before open).
3. Insert the MicroSD card into the camera.
Notes:
1.
There is only one right direction to insert the MicroSD memory card into the slot. Do not
force the card into the memory card-slot, which may damage both the camera and the
MicroSD memory card.
2.
The MicroSD memory card must be formatted before taking photographs. See the following
section for more information.
5.3 Formatting the memory or microSD card
Red/
Effect setting
1. Press the Menu button (
2. Select the setup mode by pressing the Right button.
Date stamp setting
3. Select the format icon by pressing the W (
Quick view setting
confirm.
4. Press the Shutter button to format the SD memory card.
Video resolution setting
5.4 Setting the resolution
Automatic white balance
White balance for shooting
The camera can be set to different resolutions.
under fine weather condition
1. Press the Menu button (
White balance for shooting
and press the Shutter to confirm.
under cloudy condition
Available resolutions:
White balance for shooting
VGA (640 x 480), 3M (2048 x 1536),
under tungsten lighting
5M(2592x1944); 8M(3264x2448); 14M=4320x3240; 20M=5184X3888.
White balance selected for
2. Six different resolutions will be displayed. Select the desired resolution by using the Up or
shooting under fluorescent
Down button and press the Shutter button to confirm the selection.
lighting
5.5 Taking photos
Sounds setting
Select power frequency in
1. Turn on the camera.
your location
2. Depending on the distance to the object being photographed, use macro switch to adjust
the distance.
Auto power off selection
Set the macro switch to macro mode (
(11cm–18cm);
Display language selection
Set the macro switch to normal mode (
surroundings or people (0.5m – infinity).
Date or time setting
3. If you are not sure if there is enough lighting, turn on the automatic flash (
Format the MicroSD Card
the Flash button. (If the battery power is too low, the flash won't be activated).
Reset all settings to factory
4. Use the LCD screen to aim at the object you wish to take photographs of.
default positions
5. Press the Shutter button and wait until the LCD display turns on again.
Cautions:
1) Taking pictures for fast-moving object is not recommended.
2) Image may be distorted when taking pictures in a moving vehicle.
5.6 Zooming in and out
The camera can zoom in up to 4 times.
Zoom in or out by pressing the Up or Down button, a number will appear on the display, 4.x is the
maximum zoom ratio.
5.7 Taking a self-portrait shot using the front monitor
If you want to take a photo of yourself, you can simply use the front LCD screen. Follow the steps
below:
1. Press the Monitor switching button to switch to the front monitor.
2. Use the front monitor as a viewfinder to aim at yourself.
3. Press the Shutter button to take a photo of yourself.
5.8 Self-timer setting
You can also use the self-timer function when you take a photograph of yourself or when you take
a photograph without flash of an object. To avoid shaking of the camera a tripod is recommended.
1. Set the camera to photo mode.
2. Press the Menu button (
3. Press the W (
4. Press the W (
5. Press the Shutter button to confirm. The self-timer function is now ready for use.
6. Aim at the object you wish to take photos of.
7. Press the Shutter button to take a photograph.
8. The photo will be taken after the timer reaches the delay time of 10 seconds. The camera will
beep during the delay time.
5.9 Recording video clips
1. Press the Mode button to select the video clip mode (
2. For setting the resolution, press the Menu (
Shutter button to confirm. Two resolutions will be displayed.
VGA (640 x 480), QVGA (320 x 240).
3.
Press the Shutter button to start recording videos, press the right button to pause and press
the Shutter button again to stop recording. The video clip will now be saved as an AVI file in
the MicroSD memory card.
After reaching a max. video recording time of 29 minutes the camera will
automatically stop. It can only be restarted manually.
5.10 Playing back photos
1. Press the Playback (
2. The last picture or video clip taken will be displayed. Press the W (
mode. Press the Left /Right /Up/Down button to select the desired picture, and press the
Shutter button to view.
3. In full screen display, press the T (
4. To shift the image in zoom-in mode, press the Shutter button and then use the
Mode/Menu/Left/Right buttons.
5. Long press the Menu (
Slide Show and set up the desired slide show way. Press the Shutter button to confirm. The
pictures saved in the MicroSD card will be displayed in sequence automatically. To stop slide
show, press the Shutter button.
) in PHOTO or VIDEO mode.
) button and press the Shutter button to
) in PHOTO mode, select the resolutions icon by the W (
) if you wish to take a close-up photograph.
) if you wish to take a video or a photo of
). The menu will appear.
) button to select Self Timer and confirm by pressing the Shutter button.
) button to select the "On" option
).
) button and select Resolution, then press the
) button to enter the Playback mode.
) to enter the thumbnail
) button to zoom in the photo.
) button in Playback mode until the menu is displayed. Select
6. Long press the Menu (
) button in Playback mode until the menu is displayed. Select
Photo Effect and press the Shutter button. Select the desired effect by pressing the up/down
button and press the shutter button to confirm. The image will be saved as a separate image.
5.11 Protecting photos/videos
To lock up the photos/videos and make them under protection from being deleted by the camera,
follow the instructions below.
Follow the instructions below to protect photographs/videos.
1. Press the Playback (
) button to get into Photo playback mode.
) key
2. Press the Left or Right button to select the photograph/video clip to be protected.
3. Long press the Menu (
) button in Playback mode until the menu is displayed. Select
Protect and press the Shutter button.
4. Select "Single" or "Protect all" and press the Shutter button to confirm to set a single file or all
the files under protection.
5. To unprotect the protected file(s), please select "Unprotect all".
5.12 Resizing photos
A captured image can be resized and saved as a separate image.
Follow the instructions below to resize photographs.
1. Press the Playback (
) button to get into Photo playback mode.
2. Press the Left or Right button to select the photograph/video clip to be resized.
3. Long press the Menu (
) button in Playback mode until the menu is displayed. Select
Resize and press the Shutter button.
4. Select the new size and press the Shutter button to confirm. The image will be saved as a
) by pressing
separate image.
5.13 Playing back video clips
1. Press the Playback (
) button to enter the playback mode.
2. Press the Left or Right button to select the video.
3. Press the Up button to play the video.
4. When the video is being playing, press the Up button to pause or resume.
5. Press the Right button for fast forward or press the Left button for fast rewind.
6. Press the Mode button to stop and exit.
5.14 Deleting photos and video clips
You can delete a single photograph / video clip, or delete all the photographs / video clips in the
memory card.
Follow the instructions below to delete photographs/videos.
1. Press the Playback (
) button to enter the playback mode.
2. Press the Left or Right button to select the photograph/video clip to be deleted.
3. Press the Menu/Delete button（
4. Press the Shutter button to confirm.
5. Press the Menu button to exit.
Note:
Select "All" and press the Shutter button to confirm, all the pictures and videos will
be deleted. Photos that are protected from accidental erasure cannot be deleted. To delete
photos, set the protect setting for the set photos to unprotect mode (Section 5.11), you can
then delete the photos by following the above 1- 5 procedures.
6. Connecting to a PC
The unit can be connected to the computer as mass storage device and transfer photo/video files
for storage.
7. Specifications
Sensor
14.0 Mega pixels CMOS sensor
20 Mega pixels: (5184x3888)
14 Mega pixels: (4320x3240)
8.0 Mega pixels: (3264x2448)
Image resolution
5.0 Mega pixels: (2592x1944)
3.0 Mega pixels: (2048x1536)
VGA: (640x480)
Lens
F/2.8 f = 8.5mm
Focus range
0.5m. ~ Infinity
11cm – 18cm
Macro mode
Digital zoom
4x
Flash strobe
Built-in ( Auto / force / off )
M-Shutter
Yes
LCD display
2.7+1.8" TFT color display
White balance
Auto / Daylight / Cloudy / Fluorescent / Tungsten
Video Frame Rate
30fps@VGA / 30fps@QVGA
External Storage Media
MicroSD card, not included (supports up to 32GB)
File format
Picture: JPEG, Video: AVI
Self timer
10 seconds
PC interface
USB 2.0
Power source
2 x AAA alkaline batteries
）and select "Single" or "All" .