dibea x500 Manual del usuario - Página 18

Navegue en línea o descargue pdf Manual del usuario para Aspiradora dibea x500. dibea x500 20 páginas. Smart

Product Maintaining

A. Check side brushes to see whether they're damaged or whether

there are foreign matter stuck on the brushes.

B. Clean the side brushes.

C. Replace side brushes if it's damaged:

Remove the screw of side brushes by using a driver.

Press new side brushes to fix the slot.

Screw up to ensure the screw's locked OK.

Note: Before replace side brushes, check and make "L", "R" mark match.

Cleaning dust bin and filter

Note: After taking out dust bin, check whether there is foreign matter stuck in suck passage and clean it.

A. Press "PUSH" mark to open the dust bin cover.

B. Take out the dust bin.

C. Separate HEPA filter first from dust bin.

D. Pull out dust bin top cover and take out primary filter.

E. Empty dust bin and wipe the dust.

F. Wash dust bin by water and clean filters with cleaning tool.

Note: 1. Clean dust bin module once dust bin and "!"icon on display panel light constantly.



2. Wash HEPA filter after 15-30 days' use. And replace it after use for 6 months at maximum.

G. Install primary filter and HEPA filter into dust bin.

Note: 1.Install both HEPA and primary filters when they are dry.

2.Do not place HEPA and primary filters directly in the sun.

H. Close dust bin cover and install it into main body.

Note: Dust bin and filters (including HEPA and primary filter) could be replaced if needed.

Product Maintaining

Cleaning sensors and auto charging sensors.

Slightly wipe the sensor window and auto charging sensors with cleaning tool or a soft dry cloth.

Note:

Charge connecting points on charging home base need to clean if dirty.

Never let water, thinner, etc directly touch the sensor window.