Easypix Challenge HD Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Videocámara Easypix Challenge HD. Easypix Challenge HD 10 páginas. Action camcorder

VIDEO RECORD

1. Hold down the power button for 2 seconds and

release. The Action Camcorder will vibrate 3 times,

illuminate the blue power LED.

2. Slide the Frame Rate switch to the right side for 60

frames per second or to the left side for 30 fps.

3. Hold down the record button and release, the Action

Camcorder will vibrate 3 times, illuminate the RED

LED and automatically start recording.

4. Hold down the rear button and release, the Action

Camcorder will vibrate 1 time to notify you that it is

saving the file. Then automatically start recording

again.

5. Hold down the record button for 1 second and

release. The Action Camcorder will vibrate 1 time to

notify you that it is saving the file and stop record.

6. Hold down the power button for 2 seconds and

release. The Action Camcorder will vibrate 1 times

and power off.

Note: 1. Your Action Camcorder will exhibit sustained vibration

during the start-up & shut-down sequence, this is normal

operation.

2. The charge LED will illuminate when there is no memory

card inserted properly in the Action Camcorder.