DiBiQuadro SaturnLO Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Amplificador DiBiQuadro SaturnLO. DiBiQuadro SaturnLO 19 páginas.
También para DiBiQuadro SaturnLO: Manual del usuario (14 páginas)
Imprimir página
Controls
NORMAL. It engages the clean/crunch
tones. Two switches are linked to the
Normal
channel:
switch gives you a boost on the high
end part of the spectrum; instead the
crunch/clean introduces distortion from
barely audible to full raw depending on
the PREAMP setting.
OVERDRIVE.
It
selects
channel. This is the sound the original
hardware is known for, from light
crunch to full blown madness.
PREAMP. This knob adjusts the amount
of gain of the selected channel.
TONE-STACK. Simply Bass, Mid, Treble as
you would expect on a great amp.
There is one tone-stack for each
channel.
DEPTH/PRESENCE. Depending on the
selected Pwr/Cab these controls may
be present or not in order to tweak
respectively the bottom-end and the
top-end of the power amp section.
CHANNEL OUTPUT. Here is where the
magic comes in. Not only the OUTPUT
can be used to tweak the general
volume but also serves as a tone
shaper
of
the
general
response:
higher
enhance the character of the distortion
on the top end. Keep it low to get silky
tones, raise it to get presence and
thickness.
the
bright/normal
the
hi-gain
frequency
OUTPUT
settings
INPUT [dB]. This knob adjusts the amount
of signal entering the plugin. It can be
used as a clean boost before the
preamp and safely pushed beyond the
0dB because there is no clipping
between the INPUT knob and the
preamp circuit. The INPUT LEVEL meter
displays the amount of signal in input
and it is directly affected by this knob.
OUTPUT [dB]. This is a clean volume
knob on the general output of the
plugin. Use this control to properly feed
the next plugin in the chain without
affecting the tone of SaturnLO. The
general output level is displayed by the
OUTPUT LEVEL meter.
LOAD/SAVE. The LOAD button opens a
window to select a previously saved
preset – this includes knobs, buttons,
switches, SIZE (only on Windows), SET,
PREAMP, HEAD, POST and PWR/CAB
settings –. The SAVE button allows to
save a file containing the current
settings of the plugin.
LOAD and SAVE windows
8