DiBiQuadro GeminiPTE Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Ecualizador estéreo DiBiQuadro GeminiPTE. DiBiQuadro GeminiPTE 11 páginas.

Imprimir página

Controls

GeminiPTE is a dual channel unit. Each
channel has all the classic controls you
would expect from a classic passive
tube program equalizer, plus some
basic controls to simplify the gain
staging process and the routing:
In [dB]. This knob adjusts the level of the
signal entering the plugin. When TRIM
INPUT is enabled, the input level is
automatically compensated on the
output of the plugin, allowing the user
to
quickly
adjust
harmonic distortion generated by the
circuit simulation.
Input Phase. This switch inverts the
phase of the input signal, thus before
entering the circuit simulation.
Out [dB]. It adjusts the overall output of
the plugin.
Output Phase. It inverts the phases of
output signal.
LOW [Hz] (Low Frequency Selection).
This switch determines the frequency of
the low shelf portion of GeminiPTE. Six
frequencies are available: 20, 35, 70,
100, 150 and 200 Hz.
Low BOOST. This knob determines the
amount of low shelf gain to be applied
to the frequency set by the LOW
switch.
the
amount
of
Low ATTEN. It determines the amount of
low shelf cut to be applied to the
frequency set by the LOW switch.
HIGH [kHz] (High Boost Frequency
Selection). This switch determines the
frequency of the high boost portion of
GeminiPTE.
Six
available: 2.4, 3, 3.6, 7.4, 13 and 18 kHz.
High BOOST. It sets the amount of gain
for the high frequency portion of the
equalizer.
BANDWIDTH. This knob is a Q control for
the High BOOST section. Higher values
yield a broader band.
ATTEN SEL [kHz] (High Cut Frequency
Selection). This switch determines the
frequency of the high cut portion of
GeminiPTE.
Six
available: 1.2, 1.9, 2.8, 4, 5.6 and 8.4
kHz.
Hi ATTEN. It determines the amount of
high shelf cut to be applied to the
frequency set by the ATTEN SEL switch.
SOLO. When enabled, it lets the signal
pass only through this channel, by
muting the other one.
In
addition,
GeminiPTE
following set of general switches.
INPUT TRIM. It affects the behavior of
the Input knobs (Check In [dB] for more
details).
6
frequencies
are
frequencies
are
offers
the