HTC 650 HDX Manual - Página 19
Navegue en línea o descargue pdf Manual para Máquina de suelo HTC 650 HDX. HTC 650 HDX 40 páginas.
También para HTC 650 HDX: Manual del usuario (48 páginas)
Imprimir página
HTC 650 HDX
4
Operation
4.1
General
The following section describes how to change tools and how to operate the grinding
machine. This section does not deal with the technical aspects of grinding, such as
selection of grinding tools, etc.
For choice of tool, go to HTC's website
information.
Warning!
The machine may only be used or repaired by personnel who have received the
appropriate theoretical and practical training and who have read this manual.
Warning!
Never use the machine in an environment where there is a risk of explosion or
fire. Familiarise yourself with and follow the relevant fire safety regulations
when using the machine.
Warning!
Secure the area around the machine. No unauthorised persons should be within
a 15-metre radius of the machine. If loose objects get under the grinding head,
these may be flung out and cause personal injury.
Warning!
Use protective equipment such as safety shoes, safety goggles, protective
gloves, mouth mask and hearing protection.
Warning!
The machine must only be used and moved on level surfaces. There is a risk of
crush injuries if the machine starts to roll.
Warning!
The operator must never leave the machine unattended.
Tip!
Check the minimum recommended cable area before using an extension cord.
You will find the recommended cable area under Technical Data.
4.2
Handle setting
The appropriate working height is set with the help of the adjustable handle. The handle
is locked with the handle lock on the handle cover, see Figure 4-1, page 14.
3.0
www.htc-floorsystems.com
Operation
for more
13