Bionaire BCH9234-CN Folleto de instrucciones - Página 8
Navegue en línea o descargue pdf Folleto de instrucciones para Calentador Bionaire BCH9234-CN. Bionaire BCH9234-CN 11 páginas. Bionaire bch9440-cn heater with advanced digital thermostat
Imprimir página
Trouble
• Heater Does
☛ Timer Activated.
Not Turn On.
☛ Tip-over switch engaged.
☛ Manual user reset is activated.
☛ Not plugged in properly.
☛ Electrical outlet does not hold plug
in securely.
☛ Thermostat set too low.
☛ Obstruction causing the heater not
to operate.
☛ Circuit breaker trips.
• Power Light
☛ Auto Safety Shut-off system is
is Flashing or
activated when there is potential
in some
overheat.
cases, Heater
☛ Tip-over switch engaged
Turns On at
Max Heat
setting but
then Shuts
Off in 2
seconds with
Power Light
Flashing.
• Not Enough
☛ Heater is in Fan Only setting.
Heat.
☛ Thermostat set too low.
• Heater cycles
☛ The thermostat automatically turns
ON and OFF
the heater on and off to maintain
frequently.
selected comfort level.
☛ Every 10-15 minute the heater
turns on and runs for a minute.
T R O U B L E S H O O T I N G
Troubleshooting for your Heater
Probable Cause
Solution
✔ Press the Power Button to Turn on the Heater.
✔ Set heater upright on a level surface.
✔ Follow reset instructions listed in this manual.
✔ Ensure plug is properly inserted. Make sure
electrical outlet and circuit breaker are working.
✔ Have outlet replaced by a licensed electrician.
✔ Turn the Dial Wheel right to the highest
temperature setting.
✔ Unplug the heater and remove all obstructions.
Position your heater 36 inches (0.9 m) away from
all objects.
✔ Make sure no other high wattage appliances are
operating on the same circuit and reset breaker if
needed.
✔ Follow Auto Safety Shut-off instructions to reset
the heater and allow sufficient time for the heater
to cool down before plugging in again.
✔ Set heater upright on a level surface.
✔ Change setting to Max.
✔ Turn the Dial Wheel right to the highest
temperature setting.
✔ To make this occur less frequently turn the Dial
Wheel right to the highest setting.
✔ This is normal operation to ensure the heater is
maintaining the room temp accurately.