EasyPro ECF10U Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Sistemas de filtración de agua EasyPro ECF10U. EasyPro ECF10U 8 páginas. Dual filtration, high quality pressurized filters

Imprimir página

Lamp Replacement

1. Make sure the unit is

disconnected from the

power source.

2. For the ECF10 (U)

proceed to step three,

then proceed to step

five and continue. For

the ECF25 (U) and

ECF40 (U) proceed to

step four, then pro-

ceed.

3. Loosen the screws on the top retaining ring. Do not

remove the screws - do not remove the retaining

ring. Twist the UV

housing and match

the arrow on the UV

cover with the arrow

on the retaining ring.

Gently pull up on the

cord and cover in the

back to loosen the UV

cover. (see figure 1

and 9)

4. Loosen and remove

the three screws on

top of the UV cover.

(see figure 2)

5. Remove the UV cover and set aside. (see figures 3 &

6. Remove the two screws and the plastic retainer clip

that hold the cord in place and set aside. (see figure 5)

7. Unscrew the UV light and carefully remove from the

housing. (see figure 6)

Figure 5

Figure 1

Figure 3

Figure 2

Figure 4

Figure 6