easyRAID ERP12S-10GR2 Manual de instalación rápida - Página 7
Navegue en línea o descargue pdf Manual de instalación rápida para Sistema de matriz de discos easyRAID ERP12S-10GR2. easyRAID ERP12S-10GR2 19 páginas.
Imprimir páginaCopyright
Copyright © 2010. All rights reserved. No part of this publication may be reproduced or transmitted in any form
without prior written permission.
Important Safety Instructions, Care and Handling
Before starting with the RAID installation, read this user manual carefully and save it for later reference.
Do not place the RAID system near a radiator or other heat source.
Slots and opening are for ventilation. Never block or cover them.
Do not place the RAID system near water or any liquid.
Protect the RAID system from extremely high or low temperatures.
H
L
Keep the RAID system away from magnetic objects.
Keep the RAID system away from dust, sand, or dirt.
Place the RAID system on a stable area. Protect the RAID system from being dropped or
mishandled.
Ensure that the RAID system voltage corresponds to the supply voltage.
v
If an extension cord or power center is used with the RAID system, make sure that the total current
consumption plugged into the wall outlet does not exceed the ampere rating.
• This power cord will only fit into a grounded type of power outlet.
• Unplug the power cord from the wall outlet before cleaning or servicing.
• Unplug the power cord from the wall outlet and refer to qualified service personnel under the
following conditions:
- If the RAID system has been exposed to water or any liquid.
- If the RAID system has been dropped or the casing damaged.
Do not place the RAID system where the power cord may be stepped on.
•Do not remove the cover.
•Do not attempt to service the RAID system yourself. Opening or removing the cover may expose
you to dangerous voltage or other risks.
Preface
i