EasyRobotics ER200 Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Robótica EasyRobotics ER200. EasyRobotics ER200 11 páginas.
Imprimir página
1 Introduction/intended use
ER200 is designed for integrating a cobot with a MIR AGV
with a maximum lifting capacity of 5 kg. Please read the "UR Interface - Technical
documentation" from MIR before installing the ER200
2 Safety notice
2.1 Introduction
The intension of this manual is to give a guideline of mounting a Universal Robot at
the ER200 and this is not valid as a CE marking of the robot cell.
A risk assessment most be full filled after the full installation is concluded including
the robot, gripper and other equipment and installations at the workspace.
ER200 must be correctly bolted to the MIR200 and be aware that the unit doesn't
tilt while in use.
The local governmental safety rules and legislation must be followed when installing
and running with a robot on the ER200.
1
Automated Guided Vehicle
2
https://www.mobile-industrial-robots.com/media/1338/mir100-ur-interface-installation-and-set-
up-guide-11.pdf
Revision: 2019-May-31
EasyRobotics ApS
ER200 User-Manual (en)
1
. It is intended for cobots
2
.
Page 2 of 10