Dickinson Newport P1200000-NEW-P12000 Manual de instalación y funcionamiento - Página 6

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Chimenea de interior Dickinson Newport P1200000-NEW-P12000. Dickinson Newport P1200000-NEW-P12000 11 páginas. Propane fireplace/heater

Imprimir página

Additional 28" (70cm) lengths of pipe are sold as an option ( Part No. 19-000). This pipe can be

cut with a fine hacksaw blade to the required length. A coupling fitting is provided with the

optional length.

DIRECT VENT THRU-FITTING AND CAP

Deck Flange

Screw Pilot Holes

Deck

4 Mounting Screws

INSTALLATION PROCEDURE

Step - 1 Cut a 3" hole through the deck, ceiling or wall.

Step - 2

Step - 3

Step - 4

Step - 5

Step - 6

Step - 7

www.ahoycaptain.com

Make sure the sealing gasket is installed under the above deck-flange before

screwing down the fitting.

the boat, so that it is not visible.

secure with the 6 S/S screws supplied.

Attach the dress ring on the inside, and on the underside, of the fitting with the 4

S/S screws supplied. Make sure that the opening lines up with the underside of

the thru-deck or the pipe will not fit correctly.

Install the flexible pipe on the heater.

Make whatever bends are necessary in the flexible pipe and push into the thru-

fitting.

Secure the heater in position by attaching the back mounting plate.

Using the screw pilot holes in the outer pipe of the thru-fitting drill two 1/8"

6" (15cm)

3" (75mm)

Flexible Double Pipe

Rotate the fitting to position the pipe seam, inside

Holding the deck flange firmly in position

6 Mounting Screws

Sealing Gasket

Dress Ring