BIONIME Rightest Elsa Manual de introducción
Navegue en línea o descargue pdf Manual de introducción para Medidor de glucosa en sangre BIONIME Rightest Elsa. BIONIME Rightest Elsa 2 páginas. Blood glucose test strip insert
También para BIONIME Rightest Elsa: Manual de inicio rápido (2 páginas)
Imprimir página
ELSA Blood Glucose Meter Getting Started Guide
Test Strip Port
Insert test strips here.
Display Window
Shows your test result,
messages and other
information.
Main Button
Used to operate the meter.
Please see the following
sections for further details.
Front View of Meter
Sample Entry
Test Strip
Viewing Window
Control Solution
Test Strip Vial
1
Battery Installation
1) Turn the meter over. Press and slide down the battery cover to open it.
2) Install the battery. Make sure the battery is inserted the correct way up.
3) Slide the battery cover back on until it snaps into place.
1
(For self-testing and professional use)
Meter Label
Battery Cover
Slide off to change
the battery.
Back View of Meter
Depth adjustable cap
Release button
Lancet carrier
Safety tab
Hub
Plunger
Lancing Device
Protective cover
Lancet
2
3
2
Setting Up Your Meter - Setting the Date, Time and Test Unit
1) Press and release the main button "
2) Press and hold the main button "
" for 7 seconds until you enter the Settings mode. Note that the
meter will first turn off before entering the Settings mode. Continue holding the main button until the
Settings mode appears.
3) With the year blinking, tap the main button "
4) Press and hold the main button "
" to confirm the year and move to the next setting.
5) Repeat steps 3 and 4 to set the date, time format, hour, minute, volume, and test unit (*According to
regulations in different countries/regions, the unit may be fixed at mg/dL or mmol/L and cannot be
changed. In this case, the option to change the unit will not be displayed).
NOTE
- Do not use this meter close to sources of strong electromagnetic radiation to prevent
interference with proper operation.
- Keep the meter free of dust, water and any other liquids.
3
Preparing the Lancing Device
1) Hold the depth adjustable cap with one hand and hold the hub with the other. Bend the device
and apply pressure at the join until it gently pops open.
2) Pull apart both ends to separate the cap from the hub.
3) Push a new disposable lancet into the lancet carrier. Make sure it is held securely in place.
1
2
" to turn on the Meter.
" to scroll to the next number.
3