Dickson PR300 Operación - Página 3

Navegue en línea o descargue pdf Operación para Registradores de datos Dickson PR300. Dickson PR300 6 páginas. Pressure logger

1.888.610.7664

Getting Started

•

Install the DicksonWare ™ Software.

•

Unscrew the logger cover, connect the cable (supplied with the software) to the logger and to a

working serial port on your computer. If the port is not COM2, refer to "No Communication " in the

Troubleshooting section below. NOTE: Download cable needs to be pressed firmly to make proper

connection for downloading.

•

Click the "Setup " button and then press the "Clear" button. This will delete all data currently

stored.

•

The logger is now sampling and ready for use. The default sample interval is 1 minute. Verify

that the

indicator light is flashing every 10 seconds before putting the cover back on.

NOTE: To conserve battery life when storing the unit, press the "Setup" button and select "Stop When Full."

Fire, explosion and severe burn hazard. Do not recharge, disassemble,

heat above 85˚C, incinerate or expose internal battery to water.

Delayed Start

Program your logger to the date/time to begin logging.

Real Time Monitoring

Monitor and graph your process as it happens and print and save from real time screen.

Customize Graphed Data

DicksonWare™ calculates Min, Max and Average of all data collected. Customize data by highlighting

specific data points which will recalculate MIN, MAX and Average for highlighted information.

Export Data

A snapshot of your graph or a real time graph of points can be easily exported to other programs such as

Excel™ or PowerPoint™.

*Click on the FEATURES button in the software for*

detailed instructions on how to use above features.

Rev. 06/08

www.calcert.com

*WARNING*