Axis 2400 Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Servidor Axis 2400. Axis 2400 8 páginas. Axis 2400+ rack mounted video server: installation guide
También para Axis 2400: Especificaciones técnicas (2 páginas)

Imprimir página

Axis Blade Video Server

Read the following information to familiarize yourself with the Axis Blade Video Server

making particular note of where the connectors and indicators are located:

P/N: XXXX-YYY-ZZ

S/N: 00408C1A2B3C

Video In/Out:

AXIS 2400+ Blade - Accommodates up to 4 separate video sources

(VIDEO 1- VIDEO 4) simultaneously. Each supported video input is terminated using a

coax/BNC connector. Physical connections made using RG59 75 Ohm coax video cable

have a recommended maximum length of 800 feet (250 meters).

AXIS 2401+ Blade - Coaxial BNC connector supporting a single video source. The physical

connection is made using RG59, 75 Ohm coax video cable; with a recommended maximum

length of 800 feet (250 meters).

A single video loopthrough (VIDEO OUT) connected in parallel with VIDEO IN and

terminated with a coax/BNC connector allows direct connection of an external monitor.

Set dip switch to OFF when in use.

Top and bottom screws are used to secure the blade server in the rack.

Control Button - Using a suitably pointed object, press this

button to restore the factory default settings.

Power Indicator - The power indicator is lit while power is

applied. If it is not lit, or it flashes, there is a problem with

the power source.

Network Indicator - indicates the following:

• Yellow - indicating network activity on a 10Mbps Ethernet network

• Green - indicating network activity on a 100Mbps Fast Ethernet network

• Red - indicating no physical connection to the network

Status Indicator - indicates the following:

• Green - flashes briefly and momentarily displays orange during the start-up

and self-test routines; the indicator then displays green to indicate a healthy

unit status

• Red - displays red only if there is a problem with the AXIS Video Server

• Orange - flashes orange when resetting to the factory default settings

Product Label -

• P/N (part number) is the product model number.

• S/N (serial number) is identical to the unit's MAC/Ethernet address.

e.g. 00408c100086 = 00-40-8c-10-00-86

Axis Rack Mounted Video Server Solution

P/N: XXXX-YYY-ZZ

S/N: 00408C1A2B3C