Alpha Microsystems AM-990 Manual de servicio - Página 13
Navegue en línea o descargue pdf Manual de servicio para Escritorio Alpha Microsystems AM-990. Alpha Microsystems AM-990 15 páginas. For authorized
service personnel only:
am-990 vme service
manual
También para Alpha Microsystems AM-990: Manual de servicio (18 páginas)
Page 10
Removing your peripherals from your old chassis.
Installing the peripherals in the new chassis.
4.1Preparing Your Work Area
Before starting the upgrade, make sure your work area has the proper anti-static
safeguards.
Place the new an old chassis side by side. Make sure the power switches are off, but
each unit should have its AC power cord unplugged. To transfer equipment from your
old chassis to the new chassis, you will need a #2 phillips-head screwdriver and 3/16"
hex-nut driver.
4.2Removing the CPU and VME Expansion Boards from Your Old Chassis
Paddle Cards
The first thing you want to do is remove all the terminal and other types of I/O cables
attached to the rear panel of your old computer. Next, remove the four screws that hold
the new computer's I/O rear panel in place. Then, transfer all the rear panel paddle
cards from your old chassis over to the new computer's I/O rear panel bracket. Each
paddle card is held in place with three screws. Once all the paddle cards are secured to
the new computer's I/O rear panel bracket, set the rear panel bracket and paddle card
assembly aside until later on in the procedure.
CPU and VME Expansion Boards
Remove the two screws that hold your CPU board in place in your old chassis and the
slide the CPU board out. Before removing the VME expansion boards, mark the order in
which they are installed in your old chassis. Remove all of your VME expansion boards.
4.3Installing the CPU and VME Expansion Boards
CPU Board
Before you can install your CPU board, you must use a hex-wrench to remove the CPU
mounting bracket from the CPU board. The installation kit includes a new CPU
mounting bracket designed for your type of CPU board:
CPU mounting bracket DWF-20257-00 is for AM-180 CPU boards.
CPU mounting bracket DWF-20257-01 is for AM-185 CPU boards.
AM-990 VME Computer Service Manual
DSS-10523-00, Rev. A00