Dictaphone OpticMic Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Micrófono Dictaphone OpticMic. Dictaphone OpticMic 18 páginas. Hand microphone / bar code reader
Imprimir página2.
To
continue dictating, press
[4]
[4]
to fast forward to
the last word recorded. Then press the Record button
on the handset.
To
review previously recorded insert:
Press
[4]
[#I
or
[7]
[#I
to move directly to the insert;
Plabyback is automatic.
SCANNING BAR CODES
To scan a bar code:
1.
2.
Press the "Quick Access Key" programmed with the
Bar Code reader feature code.
Place the OpticMicTM tip either to the left or right
of the bar code-you
can start your scan from either side.
Make sure you place the tip in contact with a white
space to one side of the code.
Pass the OpticMicTM
tip
across the bar code.
As
you
move it, make sure it remains in contact with the bar
code. You can cause a bad scan
by
either lifting the
tip
during the scan or
by
scanning off the code
diagonally-not
reading the entire code.
3.
SUCCESSFUL
SCAN-You
will hear a single beep
after a successful scan.
If
you programmed the bar
code reader feature code into the ConnexionsB
telephone, then the bar code numbers will appear on
the display.
UNSUCCESSFUL SCAN-If
you do not hear a
single beep after a scan, you will have to scan the code
again.
If
you
still
cannot read the code after several
tries, then enter the digits through the telephone
keypad.
4