Axis S2024 Manual de instalación - Página 6
Navegue en línea o descargue pdf Manual de instalación para Servidor Axis S2024. Axis S2024 17 páginas. Camera station s20 appliance series
También para Axis S2024: Manual del usuario (14 páginas), Manual del usuario (18 páginas)
Imprimir página
AXIS Camera Station S20 Appliance Series
Safety Instructions
WARNING
• The Axis product shall be installed by a trained professional.
CAUTION
• Be careful of sharp metal edges. Use cut-resistant gloves during installation.
NO TICE
TICE
NO
NO
TICE
• The Axis product shall be used in compliance with local laws and regulations.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to shocks or heavy pressure.
• Avoid exposing the Axis product to vibration.
• Use only applicable tools when installing the Axis product. Using excessive force with
power tools could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners.
• Use a clean cloth dampened with pure water for cleaning.
• Use only accessories that comply with the technical specification of the product. These
can be provided by Axis or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller
for service matters.
NO
NO TICE
NO
TICE
TICE
• When transporting the Axis product, use the original packaging or equivalent to prevent
damage to the product.
The Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-time
clock (RTC). Under normal conditions this battery will last for a minimum of five years.
The battery should not be replaced unless required, but if the battery does need replacing, contact
Axis support at www.axis.com/techsup for assistance.
Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
6