DieHard 200.713101 Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Cargador de batería DieHard 200.713101. DieHard 200.713101 16 páginas. 10/2/60 amp fully automatic battery charger engine starter

Imprimir página

Charge Time Needed if Amp-Hours

is Known

• Find the Charge Factor for your battery in the table on page 11.

• Multiply by the Amp-Hour rating of the battery.

• Divide by the Charger Setting (either 2 Amp or 10 Amp.)

• Multiply by 1.25 to get the approximate Hours Neededto bring the battery to full

charge.

Example:

15 Amp-Hour (AH) Battery, 50% State-of-Charge,

2 Amp Charger Setting

[(AH x Charge Factor) + Charger Setting] x 1.25 = Hours Needed

(15 x 0.5 + 2) x 1.25 = 4.7 Hours

Charge Time Needed if Reserve Capacity is Known

• Find the Charge Factor for your battery in the table on page 11.

• Multiply the Reserve Capacity rating of the battery.

• Divide by the Charger Setting (either 2 Amp or 10 Amp).

• Multiply by 0.73 to get the approximate Hours Needed to bring the battery to full

charge.

Example:

95-Minute Reserve Capacity (RC) Battery, 25%

State-of-Charge,

10 Amp charger Setting

[(RC x Charge Factor) + Charger Setting] x 0.73 = Hours Needed

[(95 x 0.75) + 10] x 0.73 = 5.2 Hours

To keep your battery charger working properly for years:

Clean the clamps each time you

are finished charging.

Wipe off any

battery fluid that may have come in

contact with the clamps to prevent

corrosion.

Coil the input and output cords

neatly when storing the charger.

This will help prevent accidental

damage to the cords and charger.