EPH Controls A17 Instrucciones de uso - Página 2
Navegue en línea o descargue pdf Instrucciones de uso para Timer EPH Controls A17. EPH Controls A17 2 páginas. 1 zone timerswitch
Imprimir páginaA17 - 1 Zone Timeswitch
8. Reviewing the program settings
Lower the cover on the front of the unit.
Move the selector switch to the PROG SET position.
By pressing 'OK' this will review each of the ON/OFF times for P1 to P3.
When completed, move the selector switch to the RUN position.
9. +1HR function
This function allows the user to extend the ON period for 1 hour.
If the timeswitch is timed to be OFF, you have the facility to switch it ON
for 1 hour.
Press the '+1HR' button once.
To cancel the boost function, simply press the '+1HR' button again.
10. Advance function
This function allows the user to bring forward the next switching time.
If the timeswitch is currently timed to be OFF and the 'ADV' is pressed, the
zone will be switched ON until the end of the next switching time.
If the zone is currently timed to be ON and the 'ADV' is pressed, the zone will
be switched OFF until the end of the next switching time.
Press the 'ADV' button for this function.
To cancel the ADVANCE function, simply press the 'ADV' button again.
11. Holiday mode
Lower the cover on the front of the unit.
Move the selector switch to the RUN position.
Press the 'Holiday' button.
The current date and time will ash on the screen.
It is now possible to enter the date when you plan to return.
Press the '
' or '
' buttons to adjust the holiday period required.
Press the 'OK' button.
The timeswitch is now switched OFF for the selected number of days.
By pressing the 'OK' button again, this will cancel the holiday mode,
thereby returning the timeswitch to the normal setting.
12. Backlight mode selection
There are two settings for selection. The factory default setting is ON.
ON
The backlight is permanently ON.
AUTO
On pressing any button the backlight stays on for 10 seconds.
To adjust the backlight setting, lower the cover on the front of the unit.
Move the selector switch to the RUN position.
Press the 'OK' button for 5 seconds.
will appear on screen.
Press either the '
' or '
' buttons to select the ON or AUTO mode.
Press the 'OK' button.
RUN
CLOCK
SET
RUN
CLOCK
PROG
SET
SET
On
RUN
CLOCK
PROG
SET
SET
EPH Controls Ireland
Sitecast Industrial Estate, Pouladu ,
Cork, T12 W665, Ireland
[email protected] www.ephcontrols.com
Page 2 of 2
Operating Instructions
13. Keypad lock and unlock
PROG
SET
To lock the keypad, press and hold the 'OK' and 'Holiday' buttons for
5 seconds.
will appear on the screen. The keypad is now locked.
To unlock the keypad, press and hold the 'OK' and 'Holiday' buttons
for 5 seconds.
will disappear from the screen. The keypad is now unlocked.
Unlocked