EPH Controls Boost Timer PRO Manual de instalación y funcionamiento - Página 9
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Timer EPH Controls Boost Timer PRO. EPH Controls Boost Timer PRO 16 páginas. Boost timer pro
Imprimir página
Safety
Switch the 230V mains supply off by removing the relevant
fuse or switching off the relevant MCB prior to beginning the
installation.
A minimum conductor size of 2.5mm
must be used to supply
2
the Boost Timer.
Ensure the correct sized cable is used to connect the Boost
Timer to the relevant appliance to be switched.
For 3 kW loads, a minimum cable size of 1.5mm
should be used.
2
As per diagram on page 6 and 7.
Connect the mains supply cables to the correct terminals;
L in, N in and Earth.
Connect the load cables to the correct terminals, L out, N out
and Earth.
9
Boost Timer Pro