DieHard 751317212 Manual del usuario - Página 12
Navegue en línea o descargue pdf Manual del usuario para Arranque a distancia DieHard 751317212. DieHard 751317212 13 páginas. 12v battery charger & engine starter
Imprimir página
PROBLEM
Short or no start cycle when
cranking engine.
The measured current is
much lower than what was
selected.
16. BEFORE RETURNING FOR REPAIRS
16.1 When a charging problem arises, make certain that the battery is capable of accepting a
normal charge. Double check all connections, the AC outlet for a full 120 volts, the charger
clips for correct polarity and the quality of the connections from the cables to the clips and
from the clips to the battery system. The clips must be clean.
16.2 When a battery is very cold, partially charged or sulfated, it will not draw the full rated
amperes from the charger. It is both dangerous and damaging to a battery to force higher
amperage into it than it can effectively use in recharging.
16.3 When an UNKNOWN OPERATING PROBLEM arises, please read this complete manual
and call the customer service number for information. This will usually eliminate the need
for return.
or for information about troubleshooting or replacement parts,
Drawing more than 50 amps.
Failure to wait 3 minutes
between cranks.
Battery may be severely
discharged.
The charger may be
overheated.
The charger reached the
maximum voltage and is
reducing the current.
If the above solutions do not eliminate the problem,
call toll-free from anywhere in the U.S.A.
7:00 am to 5:00 pm Central Time, Monday through Friday
POSSIBLE CAUSE
1-800-732-7764
12
•
•
REASON/SOLUTION
Crank time varies with the
amount of current drawn.
Wait 3 minutes of rest time
before the next crank.
Charge for 10 to 15 minutes
at the 10A rate to help assist
in cranking.
The thermal protector may
have tripped and needs a
little longer to reset.
No problem; this is a normal
condition.