Diehl SCYLAR INT 8 Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Calculadora Diehl SCYLAR INT 8. Diehl SCYLAR INT 8 20 páginas. Module modbus rtu
Imprimir página
Module Modbus RTU
4 MODULE INTERFACE
Fig.1
5 MODULE INSTALLATION
Fig.2
Meter
Internal connection using a
Diehl Metering cable ribbon
(P/N: 3013651)
Power
Screw connector terminals :
supply
60 (polarity independent)
61 (polarity independent)
EIA-485
Screw connector terminals :
90 (non-inverting, +)
91 (inverting, -)
Status
Used to restore device default
button
settings and check device
status.
Used to signal transmission in
Status LED
Modbus RTU network and to
confirm default setting
restore. Status LED lights up
when Status Button is
pressed.
1. Open the meter by releasing side catches
and take front panel off as described in
Installation and User Guide for SHARKY 775
Ultrasonic
Compact
Installation and User Guide for SCYLAR INT 8
Calculator.
2 . Localize appropriate extension slot on front
panel back side.
3. Place the module into one of slots (see
Picture 5.1). Ensure that the positioning
elements match the cuts on the module.
4. Press the module towards to front panel of
the meter to latch the module with the fixing
lug.
5. Check that module is stable installed in slot
6. Connect module with meter by ribbon
cable
4
Energy
Meter
or
04/2019