Olympus IR-500 Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Cámara digital Olympus IR-500. Olympus IR-500 2 páginas. Ir-500 dock and done 2.0 supplement (english)
También para Olympus IR-500: Manual de referencia (30 páginas)

Imprimir página

— With Dock&Done-compatible printer —

C Dock&Done-compatible printer*

QUICK START GUIDE

Digital Camera

IR-500

Print directly by

Thank you for purchasing this OLYMPUS Digital Camera IR-500.

Sold separately

one-touch operation

This guide contains instructions for basic operations to use the digital camera

— With Dock&Done-compatible storage unit and printer —

immediately after purchase. For details on operations and settings, refer to

the supplied reference manual. For inquiries, contact the OLYMPUS service

center in the enclosed Authorized Distributors List.

Your new life of photography has begun.

What is QDock&Done?

Storing images and photo printing

Dock&Done is a total system that puts personal imaging into a single

can be done at one time

process. For example, by simply setting the digital camera on the cradle,

A Dock&Done-compatible Digital Camera (IR-500)

new pictures are stored, photo printing is done and the camera's batteries

are recharged.

By simply connecting to Dock&Done-compatible products through the

— With Dock&Done-compatible storage unit —

cradle, storing images and photo printing can be done with ease.

A Digital camera

B Dock&Done-compatible storage unit

Connect the Dock&Done-compatible digital camera and store image

ﬁ les in a simple step.

B Dock&Done-compatible

C Dock&Done-compatible digital photo printer

storage unit*

By connecting to the Dock&Done-compatible storage unit with the

Sold separately

Store images by one-touch operation

Dock&Done cable, storing images and photo printing can be done with

ease.

Tip

Printed in Japan

1AG6P1P2324--

VM036402

Availability of these models may vary from country to country.

User registration

Preparation

To stay informed of important updates and news regarding your Olympus

product, be sure to register your purchase. You can register by one of the

Inserting the battery and card

following ways:

A Digital camera

a Open the battery/card cover.

• Register online

Install the OLYMPUS Master software from the supplied CD-ROM.

When starting OLYMPUS Master after installation, the registration screen

appears.

• Use the registration card

Fill out the supplied registration card, and return it by mail.

QDock&Done cable*

Unpacking the box contents

Grasp the cover on both sides and lift it up.

b Insert the battery and card as shown below.

Make sure your box contains everything listed below. If any item is missing

or damaged, contact the dealer where you purchased the camera.

Inserting the battery

Sold separately

Card

Lithium ion battery

Digital camera

(xD- Picture Card)

(LI-12B)

Battery lock lever

Press up the battery lock lever with

the corner of the battery.

AC adapter

Cradle

Power cord

(A511)

Notes

• Insert the card by pushing it straight in (not at an angle).

• Strap

• Basic Manual

• If you insert the card with wrong orientation or at an angle, the contact area could be

• USB cable

• Quick Start Guide (this guide)

damaged or you may not be able to remove the card.

• AV cable

• Warranty card

• Do not apply excessive force to the battery/card cover as it may be damaged.

• CD-ROMs (OLYMPUS Master/

• Authorized Distributors List

Manual CD)

• Registration card

The shape of the plug differs from country to country.

Not supplied in some areas.

c Close the battery/card cover.

Note

Do not open the battery/card cover, disconnect the AC adapter, or remove the camera

from the cradle while the camera is operating or communicating with a computer. Such

actions could destroy all the data on the card. Once destroyed, data cannot be restored.

Charging the battery

Charge the supplied battery before use.

Inserting the card

Tip

Make sure to turn off the camera by closing the multi-swing display or pressing the

power switch before charging. Charging cannot be performed when the camera's power

is on.

a Connect the AC adapter to the cradle.

Cradle

Push the card in until it clicks.

A/V OUT

(MONO)

USB

DC IN 5V

USB

To DC input terminal

To a wall outlet

AC adapter

(A511)

Power cord

The shape of the plug differs from country to country.

b Set the camera on the cradle.

Power on/off

The mark on the camera connector dial indicates the orientation of the

Opening the multi-swing display.

camera when the camera is set on the cradle. Select the mark by turning

the camera connector dial according to the desired camera orientation.

The camera automatically turns

on when the display is opened.

Setting the camera with the

The camera turns off when the

multi-swing display opened

multi-swing display closed

display is closed.

Camera

connector dial

Power lamp

Pressing the power switch.

When the camera is off with the multi-swing display opened, press the

power switch to turn on the camera. The power lamp lights up.

Power lamp

To turn off the camera, press the power switch again.

c Charging begins.

Power switch

The power lamp slowly blinks during charging. The lamp goes off when

charging is complete.

Notes

OPEN

• The power lamp blinks rapidly if an error occurs during charging. If this happens,

remove the battery from the camera and insert it again, or disconnect the AC adapter

Tips

from the cradle and connect it again.

• If you hold the cradle upside down with the camera set, the camera may fall out of

• If the camera is not operated for a certain period of time, the camera automatically

the cradle.

enters the sleep mode (standby mode) to save battery power, and the power lamp

• Do not pick up by the camera only when it is set on the cradle.

goes off. To cancel the sleep mode, press any button. You can select how long the

camera is on before it enters the sleep mode.

• When the camera has been turned on by opening the multi-swing display in the

shooting mode, if no operation is made in the ﬁ rst 30 seconds, the camera may turn

off automatically.

Selecting the display language (W)

You can select the language in which the menus and error messages are

displayed on the monitor.

a Turn the mode dial to

Multi-swing

display

Mode dial

The setup menu appears.

QUICK

VIEW

abcd buttons

OPEN

9 button

b Press a/c to select "W."

ALL RESET

OFF

ENGLISH

SCREEN

OFF

3MIN

SLEEP

CUSTOM BUTTON

Power lamp

Lights up when the

QUICK

VIEW

camera is on.

c Press d to enter the language settings.

ENGLISH

OPEN

FRANCAIS

ESPAÑOL

PORTUGUES

CANCEL

SELECT

Tips

• The available display languages differ depending on the region where the

camera is sold.

• The available display languages can be added by updating the ﬁ rmware. For

details, refer to the Olympus website.

d Press a/c to select the desired language.

e Press 9.

The selected language is set and the screen returns to the setup menu.