Olympus SC180 Manual de instalación - Página 17

Navegue en línea o descargue pdf Manual de instalación para Cámara digital Olympus SC180. Olympus SC180 24 páginas. Microscope digital camera

4.2

Step 2: Connect the camera

SC180

Camera

adapter

Microscope

You can connect the camera to the microscope and computer as soon as you've

installed the software. Do the following:

Make sure that the plug is the right way round

ATTENTION

The USB plugs are not symmetrical. Make sure that the plugs are the right way

round when you plug them into the ports.

Remove the camera's protective cap.

Mount the camera onto the microscope's camera adapter.

Plug the end of the USB cable with the type B plug into the camera socket and

tighten the knurled screws. Make sure that you only use the USB cable that is

delivered with your camera. The proper functioning of the camera can only be

guaranteed when this cable is used.

Plug the end of the camera's USB cable with the type A plug into a free USB

3.0 port of your PC. If possible, use a USB 3.0 port that is located on the back

side of your PC.

After connecting the camera to your PC, the camera driver is automatically



installed. As a rule, this installation only takes a few seconds. Please pay

attention to the icons displayed in the status bar.

Wait until the installation of the camera driver has been finished.

4 Installation

Monitor