AccuLine 40-6537 Manual de servicio - Página 10

Navegue en línea o descargue pdf Manual de servicio para Nivel láser AccuLine 40-6537. AccuLine 40-6537 15 páginas. Auto-leveling rotating laser
También para AccuLine 40-6537: Manual de instrucciones (18 páginas)

Imprimir página

1. Enter self-calibration mode



Power off the instrument and direct the X-axis towards wall.



Press the

key and

SLO PE

the

key. While continuing to hold the

happens, remove finger from the

laser is now in calibration mode.

2. X-axis calibration



Press the

key one time and verify that the X-direction LED on the keypad of the 40-6537

indicating that it has entered the self-calibration mode on the X-direction.



Press the

3. Y-axis calibration



Rotate the 40-6537 90° so that the Y-axis is now facing the wall.



Press the

key one time and verify that the Y-direction LED on the keypad of the 40-6537

indicating that it has entered the self-calibration mode on the Y-direction.



Press the

4. Self-calibration confirmation



Press the

key after finishing self calibration on both the X and Y axis and verify that the Self Calibration LED

extinguishes. The instrument will exit the self-calibration mode automatically after finishing self-calibration.



Power off the unit to store the calibration values into the 40-6537's memory.



Repower the 40-6537 and confirm the units accuracy. Repeat procedure as required.

Prepared By: Tim Wojo

key simultaneously. While continuing to hold the

SLO PE

key and observe that the rotating head of the laser continuously rotates. The

SLO PE

key to adjust the laser beam up or down to coincide with the reference line.

Revision - Date: 0 – 03232009

40-6537 Service Manual

key, observe the main display's LED's flash 3 time. Once this

SLO PE

key, remove finger from

SLO PE

flashes,

SLO PE

flashes,

Page 10 of 15