AccuLine 40-6680 Manual de servicio - Página 7

Navegue en línea o descargue pdf Manual de servicio para Nivel láser AccuLine 40-6680. AccuLine 40-6680 16 páginas. 5 beam laser pointer
También para AccuLine 40-6680: Manual de instrucciones (13 páginas)

Imprimir página

Using a Phillips screwdriver, remove 4 cross-slot sunk screws

M2.5×5(5-11-2), then remove three support rods (5-11-1).

Note: there are two kinds of these three connecting poles. Two poles with

M2 screw holes are in the front (see figure 12).

Using a Phillips screwdriver, remove 2 cross-slot plate screws

M2×3(5-11-3), then remove off the buzzer module (5-11-4).

Using a Phillips screwdriver, remove 3 cross plate screws M2×6 (5-11-5),

then remove partition ring (5-11-6). Reference figure 13.

Using a Phillips screwdriver, remove 2 cross plate screws M2×4(5-11-7),

then remove limit-position cover (5-11-8).

Take out 6 magnets (5-11-9)



Note: Polarities of two adjacent magnets are reverse

Using a Phillips screwdriver, remove 4 cross plate screws

M2×4(5-11-13), then remove the axis base (5-11-12) and axis

module (5-11-11).

5- 11- 13

5- 11- 12

Prepared By: Tim Wojo

5- 11- 7

5- 11- 8

5- 11- 9

5- 11- 11

Revision - Date: 0 – 20080430

40-6680 Service Manual

5- 11- 4

5- 11- 6

5- 11- 10

Figure 14

5- 11- 1

Figure 12

5- 11- 2

5- 11- 3

5- 11- 5

Figure 13

Page 7 of 16