Olympus BX-RLA2 Manual de instrucciones - Página 30

Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus BX-RLA2. Olympus BX-RLA2 32 páginas. Reflected light brightfield/darkfield illuminator

Imprimir página

Fig. 13

Attaching the Illuminator

}Attach the illuminator using the exclusive 4 mm Allen wrench (

provided with it.

}Remove the caps of the mounting screws ² using tweezers, etc.

1. Place the illuminator @ on the mounting surface by slightly deviating the

mounting screw ² of the illuminator toward the front of the mounting

screw holes ³ on the microscope frame. For the present, it is not required

to align the illuminator's mounting screws with the microscope's mounting

screw holes.

2. Apply the illuminator toward the rear of the microscope frame. The illumi-

nator will fit in the correct position.

3. While maintaining the correct condition, tighten the 4 clamping screws ²

by turning it clockwise using the 4 mm Allen wrench.

4. Place the caps of mounting screws ² on the original position

Attaching the Stage

Tighten the stage clamping screw.

(Fig. 13)

)