Olympus BX3-RFAS Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus BX3-RFAS. Olympus BX3-RFAS 16 páginas. Coded function system
También para Olympus BX3-RFAS: Manual de instrucciones (36 páginas), Manual de instrucciones (16 páginas)
Imprimir página
1
Fig. 1
2
Fig. 2
5
Note 1)
RS-232C cable specifications
D-sub 9-pin (female)
Note 2)
When connecting a cable to the BX3-RFAS, U-D7RES, U-5RES-ESD or
U-D5BDRES-ESD connector, align the t markings @ on the connectors
of the cable and the U-CBS (Fig. 1).
Note 3)
Hang the U-CBS control box 2 on the hangers 3 on the rear of the
microscope frame (Fig. 2).
} When using coded revolving nosepiece (U-5RES-ESD, U-D5BDRES-ESD),
place U-CBS on the table. Refer to manual of coded revolving nosepiece.
3
Note 4)
When this system is used with the DP21 microscope digital camera, set
the power switches to ON in the order of: @ U-CBS and 2 DP21-CB.
Otherwise, the DP21 will not recognize the U-CBS. Also if the U-D7RES,
U-5RES-ESD or U-D5BDRES-ESD are not connected to the U-CBS, the
DP21 will not recognize it either. So be careful.
D-sub 9-pin (female)