Olympus BX52 Manual de instrucciones - Página 29
Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus BX52. Olympus BX52 37 páginas. System
Imprimir página
ASSEMBLY
7-1 Assembly Diagram
The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of
assembly.
The BX51TRF and BX52TRF microscope frames are assembled in the same procedures as the BX51TF and BX52TF
frames.
The module numbers shown in the following diagram are merely the typical examples. For the modules with which the
module numbers are not given, please consult your Olympus representative or the catalogues.
# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any
parts or touching glass surfaces.
Assembly steps enclosed in
}Most assembly operations are possible by using the Allen screwdriver (
However, the assembly of the reflected light illuminator requires the use of the provided Allen wrench (
the internal screws (to ensure the performance, we recommend that you have your Olympus representative assemble or
remove this module).
Eyepiece
WH10X (FN 22)
35WH10X (FN 22)
SWH10X-H (FN 26.5)
35SWH10X (FN 26.5)
Revolving nosepiece
U-5RE-2
U-D6RE
U-D7RE
Specimen holder
U-P6RE
U-HLD-4
U-HRD-4
U-HLS-4
U-HRS-4
Stage clamping
knob
Stage
U-SVRB-4
U-SVLB-4
U-SRG
will be detailed on the subsequent pages.
UIS
series
objective
Specimen holder
clamping knobs
Condenser
U-AC2
Condenser clamping
U-SC3
knob
U-AAC
U-ULC-2
U-UCD8
Reflected light illuminator
BX-URA2
BX-RFA
Observation tube
U-BI30-2 (FN 22)
U-TR30-2 (FN 22)
U-TBI3 (FN 22)
U-SWTR-2 (FN 26.5)
U-ETBI (FN 22)
Intermediate
attachment
U-EPA2
U-DO3
U-TRU, etc.
Tube clamping
screw
Revolving nosepiece
clamping screw
Microscope frame
BX51TF
BX52TF
Lamp socket
clamping screw
BX51/BX52
) provided with the microscope.
) for clamping
Reflected
lamp
housing
Microscope frame
BX51TRF
BX52TRF
Power cord
100 W halogen
lamp housing
U-LH100-3
100 W halogen bulb
12V100WHAL-L
12V50WHAL-L
27