Olympus BXFM-ILH Manual de instrucciones - Página 27
Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus BXFM-ILH. Olympus BXFM-ILH 36 páginas. Focusing unit
Imprimir página
ASSEMBLY
10-1 Assembly Diagram
· The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of assembly.
· The module numbers shown in the following diagram are merely the typical examples. For the modules with which the
module numbers are not given, please consult your Olympus representative or the catalogues.
# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any parts
or touching glass surfaces.
}Assembly steps enclosed in
}All assembly operations are possible by using the Allen screwdriver (
the BX-URA2 or BX-RLA2 vertical illuminator should be attached using the Allen wrench (
to clamp the internal screws.
Eyepiece
WHN10X (FN 22)
35WHN10X (FN 22)
SWH10X-H (FN 26.5)
35SWH10X (FN 26.5)
Observation tube
Reflected
clamping screw
light
illuminator
Analyzer
BX-URA2
U-AN
BX-RLA2
U-AN360-3
Polarizer
U-PO3
U-POTP3
Revolving
nosepiece
Illuminator holder
BXFM-ILH
Objective
adapter
BD-M-AD
Brightfield
objective
Brightfield
objective
will be detailed on the subsequent pages.
Observation tube
U-BI30-2 (FN 22)
U-TR30-2 (FN 22)
U-TBI3 (FN 22)
U-SWTR-3 (FN 26.5)
Compact reflected
light brightfield
Filter
illuminator
U-25ND6-2
U-KMAS
U-25ND25-2
U-25ND50-2
U-25LBD
U-25IF550
Illuminator
clamping
knob
Revolving
nosepiece
Illuminator
clamping
holder S
screw
BXFM-ILHS
Counter spring
BXFM-ILHSPU
) provided with the microscope. However,
Intermediate
attachment
U-CA
U-DP
U-APT
Lamp housing
clamping knob
Halogen lamp bulb
12V100WHAL-L
12V50WHAL-L
Focusing unit
BXFM-F
Pillar clamping
knob
Stand
U-ST
) provided with the illuminator
Halogen lamp
housing
U-LH100-3
Power cord
Power supply
TH4
Hand switch
TH4-HS
BXFM
24