Olympus CK40 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus CK40. Olympus CK40 39 páginas. Culture microscope

Fig. 6

Fig. 7

Fig. 8

Mounting the Objectives

# First raise the revolving nosepiece slightly to remove the transporta-

}Keep the transportation pad in a safe place. You will need it when the

1. Turn the coarse adjustment knob @ towards the back until the revolving

2. Screw the objective with the lowest magnification into the revolving nose-

}Mounting the objectives this way makes it easier to change magnifica-

}With the CK40, the objectives can be mounted through the opening on

# Clean the objectives periodically. The objective tips on a culture

# Be sure to cover any unused threaded holes with the objective cap

Mounting the Stage Extension

Plate/Mechanical Stage

}The stage extension plate can be mounted on the left or right side of the

}This can also be mounted on either the left or right side of the stage.

tion pad on the nosepiece's base.

equipment is sent for repair or transported to another location.

nosepiece is set at its lower limit. (Fig. 6)

piece from the left side. Then turn the nosepiece clockwise and mount

the remaining objectives in order of magnification –– from low to high.

tion.

the stage.

microscope are susceptible to dust.

² to prevent dirt and dust from getting inside. (Fig. 7)

stage to expand the stage surface. However, the stage extension plate

and mechanical plate cannot be used simultaneously on the same side.

Mounting the CK2-SS Stage Extension Plate

Screw the clamping screws @ into the stage extension plate and then

into the plain stage from above on the right side or from below on the left

side. Tighten them with a coin or similar tool until the plate is securely

attached.

Mounting the CK40-MVR Mechanical Stage

Mount it in the same way as the stage extension plate.

(Fig. 6 & 7)

(Fig. 8)