Olympus CX23 Manual de instrucciones - Página 27

Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus CX23. Olympus CX23 32 páginas. Biological microscope

Reflection mirror CH20-MM

} This is a reflection mirror to be used for microscopic observation

using natural light in place of the LED illumination in a location

where power supply is not available.

CAUTION

Fit the reflection mirror in the window lens of the microscope frame by

aligning the position of the mounting tab.

Face the reflection mirror a to the bright light. While looking through

the eyepieces, adjust the orientation of the reflection mirror to get

brighter field of view.

} A planar reflection mirror is used normally. However, if the brightness

of observed field of view is uneven, use a concave reflection mirror.

CAUTION

Store the AC adapter and the power cords into the microscope . For

detail, please refer to page 20 .

Fold the eye shades a of both eyepieces.

Hold both eyepieces and fold them downward so that the interpupillary

distance becomes minimum.

Hold the observation tube b , and loosen the observation tube

clamping knob c by turning it counterclockwise (approx. two turns).

Then, rotate the observation tube backward and tighten the observation

tube clamping knob.

Pull the plastic ring d of the front of the wooden case and open

the door.

Turn the microscope backward and slide it in the wooden case calmly.

The microscope should be installed near a window, in a

bright place that is not exposed to direct sunlight.

Loosen the observation tube clamping knob and turn the

tube by 180°, since the reflection mirror can not catch light

if the eyepieces are not oriented toward the rear.

In this case, it is possible to identify the location of the

specimen through the hole of the arm.

If the wooden case tilts, the stored CX23 also tilts and

it may collide with the case depending on the stage

position. When storing this product, be sure to place the

stage toward back.

CX23