Olympus CX41 Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus CX41. Olympus CX41 32 páginas. System microscope
También para Olympus CX41: Visión general (7 páginas), Instrucción (32 páginas)

Imprimir página

Fig. 8

3-4 Observation Tube

Fig. 9

Fig. 10

Moving the Specimen

Turn the upper knob which is the Y-axis knob @ to move the

specimen in the vertical direction, and turn the lower knob which is the

X-axis knob ² to move it in the horizontal direction.

#Do not use the specimen holder or stage to move the specimen,

for this will damage the rotating mechanisms of the knobs.

#When the stage and specimen holder are stopped by the pre-

focusing dial, the tension of the X-axis/Y-axis knobs increases. In

this case, do not attempt to turn the knobs to move the stage

beyond the stopped position.

Adjusting the Interpupillar Distance

Be careful not have your finger caught by the clearance below the

binocular tube during interpupillary distance adjustment.

While looking through the eyepieces, adjust for binocular vision until

the left and right fields of view coincide completely. The index dot

indicates the interpupillary distance.

}Note your interpupillary distance so that it can be quickly duplicated.

Adjusting the Tilt (U-CTBI only)

}The tilting observation tube can be adjusted to a height and angle

suitable for ease of observation.

Hold the binocular section with both hands and move it up or down

as desired.

#To prevent damage to the mechanism, do not apply an excessive

force above or below the upper and lower stop positions.

Be careful not to have your finger by the clearance @ on the cover

during tilt adjustment.

CX41

(Fig. 8)

(Fig. 9)

(Fig. 10)