Olympus SZX-AR1 Ayuda de software - Página 35

Navegue en línea o descargue pdf Ayuda de software para Microscopio Olympus SZX-AR1. Olympus SZX-AR1 41 páginas.
También para Olympus SZX-AR1: Manual de instrucciones (8 páginas)

Imprimir página

2　Others

AR Display Adjustment

■

Match the position of the AR picture with that of the camera picture.

Before performing this adjustment, be sure to perform diopter adjustment. (For diopter adjustment, please refer to steps

2 to 6 of "Observation procedures" in the system manual.)

Without diopter adjustment, the AR picture display cannot be adjusted correctly.

① Click [Setup].

② Click [AR Display Adjustment].

③ Click [Edit].

④ Place the sample and look through the eyepiece to

adjust the focus.

Reference

･Use a sample with clear contrast and contours to

make adjustments. Using a sample with printed

text, such as a business card, makes it easier to

make adjustments.

･The size of the AR display is determined roughly

by the combination of the camera and camera

adapter. When making adjustments, try to set it

around this reference value. Please refer to the

table below for the reference values.

Camera

DP23

DP27

⑤ Use the keyboard to operate. Press [2] on the

keyboard and look through the eyepiece to confirm

that the cursor appears in the AR display.

⑥ Match the AR image (a) with the optical image (b).

･Click the [Angle] control buttons and set the value

to 0. If the AR image and the optical image are

significantly misaligned in the rotational direction,

rotate the camera adapter to adjust it so that the

misalignment is within ±1°.

(For adjustment of the camera adapter, please refer

to the instruction manual that comes with the

camera adapter.)

･Use the mouse to operate. Look through the

eyepiece and click the [XY]/[Size] control buttons

Camera adapter

U-TV0.35XC-2

U-TV0.5XC-3

U-TV0.63XC

U-TV0.35XC-2

U-TV0.5XC-3

U-TV0.63XC

Size

0.397

0.278

0.22

0.57

0.399

0.317