Olympus SZX-EPA Manual de instrucciones - Página 27

Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus SZX-EPA. Olympus SZX-EPA 34 páginas. Research stereomicroscope system

Imprimir página

†

‡

Operation

Caution

# When transporting the microscope, do not hold it by the revolving nosepiece.

# Be careful not to pinch your finger between the hand guard and the objective when rotating it.

# The parfocal property when the objective is replaced is not completely guaranteed.

...

Fig. 31

‰

Fig. 32

Fig. 33

5. Place the nosepiece mount ... (with its objective mounts † facing

upward) where the objective has been by aligning the screw holes.

Using the Allen wrench (for M3 screws), clamp the revolver mount with

the provided 3 clamping screws (M3 –– 6 mm long). (Fig. 31)

# As the screw holes may be hidden behind the objective mounts †,

clamp the nosepiece mount while rotating it. (Fig. 31)

# Before installing the focusing assembly on the pillar, adjust the coarse

and fine focus adjustment knobs so that the hand guard Š does not

protrude from the lower end of the focusing assembly ‰. (Fig. 32)

6. Install the focusing assembly on the pillar, and install the observation

tube and intermediate attachment which has been removed above in

the original position.

7. Attach two objectives onto their respective objective mounts † by screw-

ing. (Fig. 31)

8. Attach the magnification indicator ring provided with the objectives on

the zooming knob (see page 10).

Hold the objective and gently rotate it until a click position where the

objective to be used is engaged in the light path.

(Fig. 33)