Olympus SZX10 Manual de instrucciones - Página 14
Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus SZX10. Olympus SZX10 40 páginas. Research high-class stereo microscope
También para Olympus SZX10: Visión general (24 páginas), Manual de instrucciones (36 páginas)
Imprimir página
4-3 Observation Tube
a
b
d
a
10
Downloaded from
ManualsNet.com
c
search engine
1
Adjusting the Interpupillary Distance
Be sure to hold the binocular assembly a with both
NOTE
hands to make this adjustment.
To prevent damaging the mechanism, do not apply an
excessive force beyond the stop position.
While looking through the eyepieces, hold the left and right of the
binocular assembly a and adjust the eyepieces by opening or
closing them for binocular vision until the left and right fields of view
coincide completely.
2
Adjusting the Diopter (Zoom Parfocal Adjustment)
Ensure that the eyepiece clamping knob a is tightened
TIP
before starting the adjustment.
Adjusting the diopter specific to the two eyes of each
observer allows the parfocality to be ensured across zoom
magnifications.
When Not Using the Eyepiece Micrometer Disk
1
Look into the right eyepiece and rotate its diopter adjustment ring b
so that the peripheral part of the visual field looks sharply.
2
Place an easy-to-observe specimen on the stage plate.
3
Rotate the zooming knob c to a low magnification and, looking only
into the right eyepiece, focus the specimen using the coarse and fine
focus adjustment knobs.
4
Rotate the zooming knob c to the highest magnification and, looking
only into the right eyepiece, focus the specimen using the coarse and
fine focus adjustment knobs.
5
Rotate the zooming knob c to the lowest magnification, look only
into the left eyepiece, and focus the specimen by rotating the left
diopter adjustment ring d instead of the coarse and fine focus
adjustment knobs.