Olympus SZX10 Manual de instrucciones - Página 30
Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus SZX10. Olympus SZX10 40 páginas. Research high-class stereo microscope
También para Olympus SZX10: Visión general (24 páginas), Manual de instrucciones (36 páginas)
Imprimir página
e
d
3
Operation
26
Downloaded from
ManualsNet.com
f
c
a
search engine
4
Place the revolving nosepiece mount c (with its objective mounts
d facing upward) where the objective mount has been by aligning
the screw holes.
Using the Allen wrench (for M3 screws), clamp the revolver mount
with the provided three clamping screws (M3, 6 mm long) e .
As the screw holes may be hidden behind the objective
NOTE
mounts d , clamp the nosepiece mount while rotating it.
5
Install the focusing assembly on the pillar, and install the observation
tube in the original position.
6
Attach two objectives onto their respective objective mounts d by
screwing.
Hold the objective and gently rotate it until a click position on the front,
where the objective to be used is engaged in the light path.
Operation for Optical Axis Aligned Photomicrography
Align the center of objective and that of the illumination
TIP
light path with the photo light path (the right line) to enable
photomicrography with high contrast.
1
Rotate the desired objective a clockwise (15°) till the click position
for the photo light path. S