Olympus SZX7 Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Microscopio Olympus SZX7. Olympus SZX7 32 páginas. Stereomicroscope system
También para Olympus SZX7: Manual de instrucciones (32 páginas)

Imprimir página

Fig. 4

Indication engraved

surface

Fig. 5

Indication engraved

surface

Using the Eye Shades

# The eye shades are not provided with ESD protection performance.

When ESD protection is required, do not use the eye shades.

When Wearing Eyeglasses

Use with the eye shades in the normal, folded-down position. This will

prevent the eyeglasses from being scratched.

When Not Wearing Eyeglasses

Extend the folded eye shades in the direction of the arrow to prevent

extraneous light from entering between the eyepieces and eyes.

Using an Eyepiece Micrometer Disk

WHSZ10X-H/15X-H/20X-H (Fig. 5)

1. Rotate the disk-mounting ring @ of the eyepiece counterclockwise to

remove.

2. Prepare an eyepiece micrometer disk ² (24 mm dia. x 1.5 mm thick),

remove dust and dirt from its surface, and fit it into the disk-mounting ring

@ so that the engraving on the micrometer disk faces downward.

3. Gently screw in the disk-mounting ring @ incorporating the eyepiece

micrometer disk into the eyepiece. Turn the ring clockwise to attach it

firmly.

WHSZ30X-H (Fig. 6)

1. Rotate the disk-mounting ring ³ of the eyepiece counterclockwise to

remove.

2. Rotate the push ring | of the eyepiece micrometer disk counterclock-

wise to remove.

3. Prepare an eyepiece micrometer disk ƒ (24 mm dia. x 1.5 mm thick),

remove dust and dirt from its surface, place it on the disk-mounting ring

³ with the engraving facing downward, and fix it with the push ring |.

4. Gently screw in the disk-mounting ring ³ incorporating the eyepiece

micrometer disk into the eyepiece. Turn the ring clockwise to attach it

firmly.

# Due to their structures the WHSZ20X-H/30X-H eyepieces apply a

magnification on the focused plane of the eyepiece micrometer disk.

These magnifications are 1.3X with the WHSZ20X-H and 2X with the

WHSZ30X-H. Be sure to compensate for these magnifications when

using the eyepiece micrometer disk in measurements.

Also, insertion of the eyepiece micrometer disk extends the light

path length and deviates the position of the diopter scale. Correct

this deviation by turning the diopter adjustment ring of the eyepiece

toward "+".

}When the eyepiece micrometer disk is not used, store it by wrapping in a

clean, soft cloth.

SZX7

(Fig. 4)

(Fig. 5)