Olympus PPO-E01 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Accesorios para cámaras Olympus PPO-E01. Olympus PPO-E01 10 páginas. Underwater lens port for pt-e series

Imprimir página

Loading the Camera and Lens

After attaching the zoom gear to the camera lens, insert the camera and lens into the PT-E series case on

which the PPO-E01 is mounted.

Screw the camera table provided with the PT-E

series case firmly into the bottom of the cam-

era.

Mode dial knob

Zoom dial

Camera table lock lever

Lift the PT- E series case's power switch dial,

mode dial knob and zoom dial, and turn the

case's camera table lock lever counterclock-

wise to release the lock. Refer to the PT-E

series case's instruction manual for instructions

of how to attach the hot shoe cable for the

flash.

Power switch dial

E-5

Remove the eyecup from the camera's viewfind-

er. If a lens cap or filter is attached to the lens or

the strap is attached to the camera, remove them

as well.

Confirm that the camera's power switch is OFF.

Align the "25 mm" zoom position with the zoom

index of the lens and, while pulling out the

zoom dial of the PT-E series case further, place

the camera table (with camera attached) on the

camera table mount on the inner side of the

front lid of the PT-E series case.

Pull out the zoom

dial further.

ENU