Olympus OEP-5 Manual de instrucciones - Página 28

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento médico Olympus OEP-5. Olympus OEP-5 40 páginas. Color video printer

Remove the single screw by which the back cover

plate is secured, using a coin, etc. (see Figure 4.5).

Pull the back cover plate up and remove it from the

main body (see Figure 4.6).

Remove the jammed paper slowly (see Figure 4.7).

Replace the back cover plate (see Figure 4.8).

4.3 In the Case of a Paper Jam

Figure 4.5

Figure 4.6

Figure 4.7

Figure 4.8

Secure the back cover plate by the screw removed,

using a coin, etc. (see Figure 4.9).

Confirm that the screw holes of rear of the

main body and the back cover plate align

before securing.

Figure 4.9

Reset the paper tray and ink ribbon holder into the

color video printer (OEP-5).

Reconnect the power cord and other connecting

cables as they were.

Confirm that any connecting cables and the power

cord are securely connected.

NOTE

If jammed paper cannot be removed, or an error message

is displayed even after taking the above procedure, stop

using this instrument and contact Olympus.

Restart Printing

Even if a paper jam occurs during printing, the image of

the print is held in the flash memory of this instrument

so it can be reprinted.

CAUTION

• The image of a print stored in the flash memory is

overwritten each time a paper jam occurs. If image

data is overwritten, you will not be able to print the

image data stored before the paper jam occurred.

• Use the buttons on the front panel of this instrument

when restarting printing. Restart cannot be executed

by the keyboard of the connected equipment or remote

control unit (MAJ-898).

Press the power switch to turn ON.

When the message "RESTORE IMAGES? YES/

NO" is displayed on the monitor and the LCD

panel, press the "b" or "B" button to select "YES"

and press the ENTER button.