Olympus MX61A Manual - Página 10

Navegue en línea o descargue pdf Manual para Equipos de laboratorio Olympus MX61A. Olympus MX61A 48 páginas. Motorized 300 mm compatible semiconductor/fpd inspection microscope

Imprimir página

Applicable Standards

1. This device is in compliance with or certified by the following standards.

2. Although this device is designed for use in industrial environments, its full performances may not be manifested if it is not

operated properly. Be sure to handle it properly as instructed in this manual.

CE marking

This device complies with the requirements of both directive 89/336/EEC, 2004/108/EC concerning

electromagnetic compatibility and directive 2006/95/EC concerning low voltage. The CE marking indicates

compliance with the above directives.

FCC

This device has been subjected to the compliance evaluation of the following FCC regulation:

· FCC Part 15, Subpart B ClassA: Radio Frequency Equipment (Commercial and industrial areas)

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance

CALIFORNIA USA ONLY

This operation unit uses a Lithium Battery which contains Perchlorate Material - special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

SEMI

This device has been subjected to the compliance evaluations of the following guidelines under the S8 Standard.

· S2-0706: Safety Guidelines for Semiconductor Manufacturing Equipment

· S8-0705: Safety Guidelines for Ergonomics Engineering of Semiconductor Manufacturing Equipment

This device is designed for use in industrial environments (Class A device).

Using it in a residential environment may affect other equipment in the environment.

could void the user's authority to operate the equipment.