Olympus SZX2-ILLC10 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de laboratorio Olympus SZX2-ILLC10. Olympus SZX2-ILLC10 16 páginas. Coaxial vertical illuminators

Imprimir página

1. Table of Contents
2. Important - be Sure to Read this Chapter for Safe Use of the Equipment
3. Assembly

Fig. 3

Fig. 4

2. Loosen the light guide clamping screws 5 on the coaxial vertical illumi-

nator with the Allen screwdriver. Insert the outgoing light guide end 6 until

it stops (the force required for insertion will increase in the middle due to a

spring). Tighten the clamping screws 5.

Mounting the Quarter-Wave Plate

1. Loosen the two quarter-wave plate clamping knobs @.

2. Fit the quarter-wave plate onto the tip of the objective ² and secure the

clamping knobs.

# The quarter-wave plate should be mounted so that the clamping knobs

are on the side when seen from the front of the microscope (i.e., so

that the module indication faces the front).

(Fig. 4)