Olympus U-HGLGPS Manual de instrucciones - Página 17
Navegue en línea o descargue pdf Manual de instrucciones para Equipos de laboratorio Olympus U-HGLGPS. Olympus U-HGLGPS 20 páginas. Light guide illumination system
Imprimir página
PROPER SELECTION OF THE POWER CORD
n
If no power cord is provided, please select the proper power cord for the equipment by referring to " Specifications " and " Certified Cord " below:
CAUTION: In case you use a non-approved power cord for Olympus products, Olympus can no longer warrant the electrical
safety of the equipment.
Voltage rating
Current rating
Temperature rating
Length
Fittings configuration
A power cord should be certified by one of the agencies listed in Table 1 , or comprised of cordage marked with an agency
marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one of agencies listed in Table 1. In
case you are unable to buy locally the power cord which is approved by one of the agencies mentioned in Table 1, please
use replacements approved by any other equivalent and authorized agencies in your country.
Country
Argentina
IRAM
Australia
SAA
Austria
ÖVE
Belgium
CEBEC
Canada
CSA
Denmark
DEMKO
Finland
FEI
France
UTE
Germany
VDE
Ireland
NSAI
Specifications
125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)
6A minimum
60˚C minimum
3.05 m maximum
Grounding type attachment plug cap. Opposite terminates in molded-on IEC con-
figuration appliance coupling.
Table 1 Certified Cord
Certification
Agency
Mark
Country
Agency
Italy
IMQ
JET, JQA, TÜV,
Japan
UL Japan/METI
Netherlands
KEMA
Norway
NEMKO
Spain
AEE
Sweden
SEMKO
Switzerland
SEV
United
ASTA
Kingdom
BSI
U.S.A.
UL
U-HGLGPS
Certification
Mark
13